Clarion MAX983HD Owner's Manual page 179

Installing the Main Unit
Installing the Main Unit
This unit is designed for fixed installation in the dashboard.
1. When installing the main unit in NISSAN vehicles, use the parts attached to this unit.
When installing the main unit in TOYOTA vehicles, use the parts attached to the vehicle.
2. Wire as shown in the section "Wire Connection".
3. Reassemble and secure the unit in the dashboard and set the face panel and centre panel.
Mounting Screw Holes (Side View of the Main Unit)
For NISSAN vehicle
Installing the main unit in a NISSAN Vehicle
Main Unit
Mounting bracket
(1 pair for the left and right sides)
For TOYOTA vehicle
6-Spacer (thickness: 1 mm)
6-Flat head screw
(M5 8)
(attached to the main unit)
MAX983HD
83