Audio Cd Operations - Clarion MAX983HD Owner's Manual

Audio CD Operations

This system can display the track information (Album title, Track title, Artist name, and Genre) of the
currently played disc by using the Album Information data stored in this system.
In addition, this system can record the audio data of the disc by compressing into ATRAC3 format, and
store them as the Music Catcher data. ➜ "Recording tracks from a CD" (P. 39), ➜ "Music Catcher
Operations" (P. 40)
● About the track information of the
recorded data
When the track information can be obtained from
the Album Information data, this data is used as
the track information. If not, the album title is
named using the recording date and a
consecutive number (such as "2008. 6. 10-001"),
and the track title is named such as "Track 01".
You can edit this information in the Music
Catcher mode. ➜ "Editing album/track
information" (P. 42)
Note:
• This system can play back/record the CDDA discs,
and cannot play back/record the DTS CD discs.
Some discs with CCCD or the other format may be
able to play back.
• The Gracenote Media Database can be imported
into the hard disk drive by using the SD card. ➜
"Importing Data Using the SD Card" (P. 70)
Selecting the Audio CD mode
1. Set an audio CD to the DVD player.
The system will automatically read the disc
data, change to the Audio CD mode, and start
playback after a while. ➜ "Setting/Ejecting a
Disc" (P. 15)
And also, recording data into the Music
Catcher will be automatically started when the
CD is not recorded in the Music Catcher.
• You can change the setting so that the
recording is not performed automatically but
performed manually. ➜ "Switching the CD
Recording mode" (P. 66)
WARNING
• Some CDs may be recorded at a higher
volume level than desired. Increase the
volume gradually from the minimal
setting after the playback has started.
Note:
• While recording the CD, no operation for the disc
can be made unless cancelling the recording. If
you cancel recording, you can restart the recording
by the manual operation. ➜ "Recording tracks
from a CD" (P. 39)
● When an audio CD is already set
1. Press the [SRC] (Source) button to display the
Source menu screen.
2. Touch the [DVD/CD] key to select the Audio
CD mode.
The system changes to the Audio CD mode,
and starts playback from the previous
position.
Audio CD mode screen
Album title
Information pane
Track title/Recording status
● AV Shortcut menu on the Map screen
Track list pane
37
MAX983HD