Chapter 1 Agilent Modules Supported By Lc Devices Versions 2.0.2 And 2.1.0 - Agilent Technologies 1100 Series User Manual

Agilent Modules Supported by LC Devices
Versions 2.0.2 and 2.1.0
Thermo Scientific
Table 1 lists the model number and firmware versions for the Agilent 1100 Series LC
modules that are supported by the Xcalibur 2.0 and higher data system.
Table 1. Xcalibur 2.0 supported firmware versions for the Agilent 1100 Series LC
Module
Binary pump
Quaternary pump
Autosampler
Thermostatted autosampler
Well-plate autosampler
Thermostatted column compartment
Variable wavelength detector
Diode-array detector
Multiple wavelength detector
*
Only works with version B of the Control Module.
To check the firmware version of an Agilent 1100 module
1. Make sure that the Agilent 1100 Series modules are connected by CAN communication
cables, that all the modules are turned on, and that the Agilent 1100 Control Module is
connected.
Refer to the Agilent 1100 Series LC reference manuals for instructions on how to connect
the CAN cables.
2. Press the Esc key on the Control Module until System appears in the upper-left corner of
the LCD display.
3. Press the F4 key on the Control Module to access the Records LCD display.
Agilent 1100 Series LC Devices Connecting the Hardware and Triggering Data Acquisition
Model Number
G1312A
G1311A
G1313A
G1329A
G1367A
G1316A
G1314A
G1315A
*
G1365B
1
Firmware Version
A.06.01 (012)
A.06.01 (012)
A.06.01 (012)
A.06.01 (012)
A.06.01 (012)
A.06.01 (012)
A.06.01 (012)
A.06.01 (012)
A.06.01 (012)
1