Page 1
Wireless Chime This package includes (Style of door sensor and chime may vary from illustration): Chime Chime cover Wireless push Hardware base button pack Model 7868 ✔ ✔ ✔ ✔ 7870 ✔ ✔ ✔ ✔ 7871 ✔ ✔ ✔ ✔...
Page 2
3. Install 2 alkaline “C” batteries. Press in catch on bottom of battery cover and lift to remove (see Figure 3). Make sure batteries are oriented properly (see Figure 4). 4. Test range. Temporarily position chime and push button where you want them mounted. Press push button to verify chime and push button work properly.
Page 3
Tune Settings The chime has different selectable tunes: Ding (one note tune) or Ding-Dong (two note tune). The factory setting is for the Ding-Dong tune. This tune can be changed by following the instructions in the Tune Setting Table. Note: All chime models are designed to work with up to 5 push buttons (sold separately).
Page 4
2. PROBLEM: Batteries seem okay, but the chime does not work after instal- lation. A. POSSIBLE CAUSE: Chime or push button is mounted on metal or near metal studs. Note: Metal reduces transmission range. A. CORRECTIVE ACTION: Use 1/4 in. to 1/2 in. (6 to 13 mm) wood shims to move chime or push button away from metal surface.