Hitachi GS4000 Series Quick Start Manual page 80

GS4000 Quick Start Guide, Revision 3
8.2 Editing of Configuration Information
8.2 Editing of Configuration Information
This section describes how to do additional settings to the configuration information you already set in the chanter "5
Configuration Information Setting" and how to change it.
The procedures for changing the VLAN ID for VLAN100 from 100 to 400 is given here, based on the configuration in Example 2
in the section "5.1 Configuration Examples".
(1) Check the contents you input.
Check the settings for the following items by displaying the configuration information currently set.
・VLAN100
・RIP for VLAN100
BSDI BSD/OS 3.1
newuser
login:
********
Password:
All Rights Reserved,Copyright(C)2003,2004,Hitachi,Ltd.
*** Welcome to the System ***
enable
GS1>
********
Password:
GS1# configure
show
GS1(config)#
#Last modified by newuser at Dec 1 17:24:07 2004 with version 09-01
!
system name "GS1"
!
vlan 1
description "Default VLAN"
router-interface DefaultVLAN
!
vlan 100
untagged-port 0/0-3
router-interface VLAN100
ip 192.168.1.1/24
!
vlan 200
untagged-port 0/4
router-interface VLAN200
ip 192.168.2.1/24
!
rip yes
interface VLAN100
interface VLAN200
!
GS1(config)#
62
...Input a user ID.
...Input a login password.
Register yourself as an administrator.
...
...Input a password of administrator.
...Enter the edit mode.
...Show the contents you set.
VLAN100 setting
Configuration information
displayed.
RIP setting
QSGGS4KX10-00 5794092-2X