Hitachi GS4000 Series Quick Start Manual page 63

(4) Save configuration infromation.
Save the configuration information you input into a file.
save
!GS1(config)#
GS1(config)#
NOTE Configuration information will be saved into a file currently opened if you skip inputting a file
name. In the example above, information will be saved into an active file on memory. You can save
configuration information into a spare file you designated by inputting its file name after the
"save" command. For details about a spare configuration information file, see the GS4000
Software Manual Configuration Settings CLI-CLI Type 1 Hierarchical Input Format-.
NOTE The mark "!" at the beginning of a prompt can be deleted by saving configuration information.
(5) Log out of GS4000.
Log out of GS4000 according to the following procedures.
exit
GS1(config)#
quit
GS1#
logout
GS1>
BSDI BSD/OS 3.1
login:
Now, you've finished all the necessary settings.
If you need to edit configuration information;
See "8.2 Editing of Configuration Information".
If you need to confirm operation status;
Skip to "6. Confirmation of Operation Status".
QSGGS4KX10-00 5794092-2X
...Save configuration information.
...Exit from the edit mode.
...Get back to the mode of general users.
...Log out of GS4000.
GS4000 Quick Start Guide, Revision 3
45