Hitachi GS4000 Series Quick Start Manual page 68

GS4000 Quick Start Guide, Revision 3
(3) Check the operation status of interfaces.
You can check detail information related to the condition of each interface.
show ip interface
GS1>
VLAN100: flags=80e3<UP,BROADCAST,NOTRAILERS,RUNNING,NOARP,MULTICAST>
mtu 1500
inet 192.168.1.1/24 broadcast 192.168.1.255
NIF0/Line0: UP media 10BASE-T half(auto) 00:00:87:68:ac:73
NIF0/Line1: UP media 10BASE-T half(auto) 00:00:87:68:ac:73
NIF0/Line2: UP media 10BASE-T half(auto) 00:00:87:68:ac:73
NIF0/Line3: UP media 10BASE-T half(auto) 00:00:87:68:ac:73
Time-since-last-status-change: 00:00:43
Last down at: 12/01 17:28:10
VLAN : 100
VLAN200: flags=80e3<UP,BROADCAST,NOTRAILERS,RUNNING,NOARP,MULTICAST>
mtu 1500
inet 192.168.2.1/24 broadcast 192.168.2.255
NIF0/Line4: UP media 100BASE-TX full(auto) 00:00:87:68:ac:73
Time-since-last-status-change: 00:10:29
Last down at: -----
VLAN : 200
GS1>
50
...The operation status of each interface will be shown.
QSGGS4KX10-00 5794092-2X