Hitachi GS4000 Series Quick Start Manual page 79

(3) Complementary functions
You can simplify the input of parameters or file names by entering the [Tab] key.
Also, you can display a list of parameters available by entering this key.
●Simplification of the input of parameters/file names
You can show a list of commands or parameters starting with the characters you've just input by entering
the [Tab] key in the middle of inputting them.
GS1(config)# li [Tab]
line
GS1(config)# lin
●Showing a list of parameters available
You can show a list of parameters you can use after the commands/parameters you've just input by
entering the [Tab] key with a apace after commands/parameters.
line line0
GS1(config)#
10gigabit_ethernet
10gigabit_ethernet_wan gigabit_ethernet
GS1(config)# line line0
(4) Help function
You can search a command or parameter you can designate by entering the [?] key.
Also, you can know the meaning of each command/parameter.
Do the following operation if you want to show a list of parameters you can use after "show ip" and know
the meaning of each parameter.
show ip
>
GS1
arp
cache
dhcp
entry
interface
local
ospf
policy
rip
route
route-filter Display the filter result of a route
static
list of parameters
GS1> show ip
QSGGS4KX10-00 5794092-2X
link-aggregation
[Tab]
ethernet
...
[?]
Enter the [?] key with a space after "show ip".
Display the information of ARP
Display the conditions of policy route group information
Display the information of DHCP server or client program
Display a detail information of a particular route
Display the information of interface
Display summarized policy routing information
Display the information of OSPF protocol
Policy routing commands
Display the information of RIP
Display routing information
Display the information of STATIC
meaning of each parameter
...Input just "li" and enter the [Tab] key.
...A list of commands starting with "li" is shown.
...In this case, the characters "lin" are complemented.
...Enter the [Tab] key with a space after "line ethernet0/0".
oc192pos
A list of parameters you can use
oc48pos
after "line line0".
GS4000 Quick Start Guide, Revision 3
61