Hitachi GS4000 Series Quick Start Manual page 34

GS4000 Quick Start Guide, Revision 3
Setup of GS4000-160E1
●Setup procedures
6.
Procedure
Check LED.
4.
Procedure
Attach an
interface cable.
2.
Procedure
Install a memory card.
Procedure
Figure 3-5 Procedures for GS4000-160E1 setup
Procedure 1.
Attach a power cable
Attach power cables to all the power supply units in GS4000-160E1.
When connecting the device to a power supply unit, use only grounded
Warning
power outlets. Failing to use grounded outlets creates a shock hazard.
Use the power cable provided with a chassis. If you use a power cable other
Warning
than this, it could cause a fire or an electric shock.
Before attaching a power cable, make sure that all the switches of GS4000 are
NOTE
turned OFF.
16
1
.
Attach a power cable.
Procedure
3.
Procedure
Connect a setup terminal to
GS4000-160E1.
QSGGS4KX10-00 5794092-2X
5.
Power on GS4000-160E1.