Deleting The User Id "Operator - Hitachi GS4000 Series Quick Start Manual

4.4 Deleting the User ID "operator"

4.4 Deleting the User ID "operator"
This section explains about the procedures for deleting the default user ID "operator".
In order to delete it, you must log into GS4000 with the new user ID you made in the section "4.3 (5) Create a new user ID,
and set a login password".
BSDI BSD/OS 3.1
login: newuser
********
Password:
All Rights Reserved,Copyright(C)2003,2004,Hitachi,Ltd.
*** Welcome to the system ***
> enable
********
Password:
rmuser operator
#
Delete user'operator'? (y/n):
# quit
logout
>
BSDI BSD/OS 3.1
login:
Now, you've finished the followings at this stage.
-Settings of a time and a password of administrator
-Addition/deletion of a user ID
Setting VLAN or an IP address of
VLAN
Cheking operation status
QSGGS4KX10-00 5794092-2X
...Log into GS4000 by inputting the new user ID "newuser".
...Input a login password.
Register yourself as an administrator of GS4000.
...
...Input a password of administrator.
...Delete the default user ID "operator".
y
...Get back to the mode of general users.
...Execute logout command.
Go to the chapter 5 Configuration Information Setting.
Go to the chapter 6 Confirmation of Operation Status
GS4000 Quick Start Guide, Revision 3
35