Finishing The Installation - Toro ProStripe 560 Installation Instructions Manual
Roller shaft kit
Hide thumbs
Also See for ProStripe 560:
- Operator's manual (28 pages) ,
- Operator's manual (24 pages) ,
- Operator's manual (24 pages)
Advertisement
Finishing the Installation
1.
Install the previously removed chain, sprocket
(10T), thrust washer (20 mm), and circlip onto
the gearbox post as shown in
2.
Secure the previously removed chain cover onto
the machine with the 2 corresponding bolts
(Figure
3).
1. Gearbox post
2. Chain
3. Sprocket
4. Thrust washer
Figure
3.
Figure 3
5. Circlip
6. Chain cover
7. Chain-cover bolts (2)
g349697
4
Advertisement
