Windows Xp; Network And Dialup Connections - Hughes DIRECWAY DW7000 User Manual

Remote terminal
Table of Contents

Advertisement

Windows XP

1. Open the Control Panel by selecting
2. A list of Network adapters appears. A Local Area Connection
3. Right-click on the Local Area Connection icon that
Start
Settings
Control Panel
Network and Dial-up Connections
Note: If the Control Panel is in category view select
Network and Internet Connections then select Network
Connections.
Figure 35: Network and Dialup Connections
icon must be listed under LAN or High-Speed Internet. If not,
the network is not installed correctly.
represents the Network adapter that connects the computer to
the terminal and select Properties. See Figure 36.
Note: If the Local Area Connection icon appears with a red
X then check your connections. The red X must not be present
in order to successfully configure your operating system's
settings.
Appendix B • Typical operating system settings
and double-click the
icon. See Figure 35.
1035978-0001 Revision A
59

Advertisement

Table of Contents
loading

This manual is also suitable for:

Direcway dw7700

Table of Contents