Table of Contents
Advertisement
Confirming receive signal
The terminal will not function if satellite signals are not received
properly.
1. At the System Control Center, click on the Reception Info
indicator. The Reception Information page appears. See
Figure 19.
Figure 19: Confirming receive signal
2. Observe the receive (Rx) code in the
If
The receiver is operational (RxCode 5)
appears in the
Receive Status
signals properly. Proceed to the next procedure.
If any other code appears, the terminal is not receiving signals
properly. Click on the code, which is a link, and follow the
troubleshooting procedure that appears.
Receive Status
field, the terminal is receiving
Chapter 4 • Troubleshooting
1035978-0001 Revision A
field.
29
Advertisement
Table of Contents
