ADC PG-FlexPlus FLL-814 Manual page 88

SCP-FLL814-012-04H
CONFIG — HDSL Alarm Thresholds (Continued)
Step
3 The following actions can be taken:
a. To change the threshold value, press
type the appropriate numbers on the keypad for each field.
b. To save the HDSL Alarm Threshold changes, select the ACCEPT HDSL ALARM THRESHOLD
CHANGES button, then press
CONTINUE (Y/N)? prompt, the following actions can be taken:
• To save the HDSL Alarm Threshold changes, press
– all current values are set to desired values
• To retain the existing HDSL Alarm Thresholds, press
4
Press . The Main Menu screen reappears.
ESC
76
Action
or to go to the appropriate HDSL Alarm Threshold. Then
↓ ↑
. From the HDSL ALARM THRESHOLDS WILL BE CHANGED.
ENTER
Y
N
. The following events occur:
.
ADC Telecommunications, Inc.
April 22, 2003