ADC PG-FlexPlus FLL-814 Manual page 113

April 22, 2003
CONFIG — Timeslot Configuration (Continued)
Step
3 The following actions can be taken:
a. To change the CU value, press
next option.
b. To change the CU# and CH# values, press
or to move to next option.
→
c. To enable or disable timeslots, press
to move to next option.
d. To assign the SUB-CH# value, press
to move to next option.
e. To save the Timeslot Configuration changes, select the SAVE SETTINGS button, then press
From the TIMESLOT CONFIGURATION WILL BE CHANGED. CONTINUE (Y/N)? prompt, the
following actions can be taken:
• To save the Timeslot Configuration changes, press
– all current values are set to desired values
• To retain the existing configuration data, press
4
Press . The Main Menu screen reappears.
ESC
ADC Telecommunications, Inc.
Action
to toggle to the desired value, or press
SPACEBAR
to toggle to the desired value, or press
SPACEBAR
to toggle to the desired value, or press
SPACEBAR
to toggle to the desired value, or press
SPACEBAR
. The following events occur:
Y
.
N
SCP-FLL814-012-04H
or to move to
← →
, ,
←
↓ ↑
, , or
← →
↓ ↑
, , or
← →
↓ ↑
.
ENTER
101