Installation And Test; Required Tools And Test Equipment; Installation; Install A Fll-814 - ADC PG-FlexPlus FLL-814 Manual

SCP-FLL814-012-04H
I
NSTALLATION AND
STATIC SENSITIVE DEVICE – DO NOT HANDLE ANY MATERIAL WITHOUT FIRST TAKING
PROPER STATIC CONTROL PRECAUTIONS.
ATTENTION
The following procedure assumes that an RT Line Unit or Doubler Unit is installed in the system and all
wiring between the CO and the RT has been completed and verified.
R T
EQUIRED OOLS AND
No special tools or equipment are required to install the FLL-814.
I
NSTALLATION

Install a FLL-814

Step
1 Open the latch on the front of the FLL-814.
2 Insert the FLL-814 into a vacant slot in the shelf that corresponds to the location of the wiring for the
service being activated.
3 Engage the retaining latch to hold the card in place.
10
T
EST
T E
EST QUIPMENT
Action
April 22, 2003
ADC Telecommunications, Inc.