Iwatsu Omega-Phone 924 Quick Reference Manual page 6

Page (Meet Me)
Meet Me Page allows the user to locate someone
that is away from their desk or has no fixed location
in the office. Using the Meet Me Page feature, you
can answer a page from any telephone in the sys-
tem.
When you hear the page:
• Lift the handset.
• Press the # key and dial 59.
• You will be connected to the extension making
the page.
Park (Park Answer)
This feature is used to retrieve a call that is parked.
• Lift the handset.
• Press the # key and dial 73.
• To pick-up a parked call: Dial the extension num-
ber where the call is parked.
Password Change (Extension Password)
To change your extension password:
• Lift the handset.
• Press the # key and dial 97.
• Enter your current password (default=0000).
• Enter your new password (four-digits).
• You will hear confirmation tone then hang-up.
Phone Lock / Unlock
This feature allows the user to prevent ANY outgo-
ing CO line calls from their extension.
WARNING! The use of this feature prevents ALL
outgoing calls including 911 emergency calls.
To Lock the Phone:
• Lift the handset.
• Press the # key and dial 97.
• Enter the extension password (default = 0000).
• Press the # key to lock the phone.
To Unlock the Phone:
• Lift the handset.
• Press the # key and dial 97.
• Enter the extension password (default = 0000).
• Press the * key to lock the phone.
Recall
The Recall feature pertains to calls that are parked,
on hold, or transferred to another extension. Calls
that go unanswered after a preset period of time are
Recalled to the extension that initiated the park,
hold, or transfer operation.
Reminder Tones
A Reminder Tone (stutter dial tone) is heard when
accessing intercom dial tone from an extension that
has Call Forward or Do Not Disturb enabled. The
stutter is a rapid, recurring break in the intercom dial
tone that reminds the user of the extensions status.
5
Single Line Telephone—Flash
Single Line Telephones and similar analog de-
vices use a Hook-switch Flash or Flash key to
administer call-processing operations like transfer
and hold. This fundamental call-control is handled
in the form of hook-switch operations.
Speed Dial Programming (Personal)
Each station can store up to 20 personal speed
dial numbers (bins 00-19) in the speed dial direc-
tory.
To program a personal speed dial number:
• Lift the handset.
• Press the # key and dial 1.
• Enter the speed dial bin number 00-19.
• Enter the telephone number.
• Press the Hook-switch or Flash key and you
will hear a confirmation tone.
To dial a personal speed dial number:
• Lift the handset.
• Press the # key.
• Press the * key and dial 1.
• Enter the speed dial bin number 00-19.
Personal Speed Dial Bin Locations
Record your personal speed dial numbers below:
00 =
01 =
02 =
03 =
04 =
05 =
06 =
07 =
08 =
09 =
10 =
11 =
12 =
13 =
14 =
15 =
16 =
17 =
18 =
19 =
6