Sirius Radio Operations - Clarion MAX385VD Owners & Installation Manual

Sirius Satellite Radio Operations
Confirming your Radio ID
.SIRIUS
1. Touch the [Search] key to display the Key
Pad screen.
2. Touch the [0] key, then touch the [ENT] key.
Your Radio ID (12-digits number) will be
displayed.
3. To return to the Sirius Radio, enter a new
channel to resume.
Selecting
a
Satellite Radio mode
1. Press the [MODE] or [SOURCE] button until
SIRIUS is displayed or select 'SIRIUS' in the
main menu. You can reach the main menu
by pressing the [MENU] button on your unit.
The system changes to the Sirius Satellite
Radio mode.
Note:
SIRIUS satellite radio is
a
subscription service.
~
Please contact Sirius Radio to begin or alter
~ your subscription:
c
Q1 •
Internet: www.sirius.com
Telephone: 888-539-SIRIUS (747487)
This function is available when a Sirius Satellite
Radio Receiver is connected through the.
dedicated connection. This unit requires the
following receiver:
~
• SIRIUS Satellite Radio Receiver: SC-C1
~
(I)
......
II>
Selecting your presets
1. Press the [BAND] button or touch the [Band]
key to enter the preset memory menu. You
can save up to 20 presets for your favorite
channels for quick access.
Displaying channel labels
1. Touch the [LIST] button and the next four
channels are displayed for your ease of
viewing.
2. Touch the [LIST] button again to return to
the main display screen.
• Information displayed during reception
The following information is displayed when the
satellite radio cannot be received normally.
• When the receiver is turned on the first time or
after a reset: "UPDATING" followed by a
percentage of completion.
• When a channel is being tuned in (no signal is
yet received): "ACQUIRING SIGNAL"
• A channel without a broadcast has been
selected: "INVALID CHANNEL"
• A channel not covered by your contract:
" CALL 888-539-SIRIUS"
Call (888)539-747487 to activate your radio
• When a channel is out of air time: "OFF AIR"
• When the antenna is disconnected or has
been damaged: "ANTENNA ERROR"
Channel selection
Channels are selected with the [ ........ ] or
[~ ~
]
buttons.
* For details, see the following operation
descriptions.
Note:
• The audio output is muted and other button
operations are not accepted during channel
selection.
33
VRX485VD/MAX385VD