Clarion MAX385VD Owners & Installation Manual page 41

Installing the Main Unit in a TOYOTA Vehicle
Install by using parts attached to the vehicle. (Screws marked
*
are attached to the vehicle.)
Center Panel
(* 2)
Figure 7
' - - - - - - Mounting bracket
(1 pair for the left
and right sides)
Note:
*2: Some panel openings are too small for the unit
depending on the vehicle type and model. In
such
a
case, trim the upper and lower sides of the
panel frame by about 0.5 to 1.5 mm so the unit
can be inserted smoothly.
*3: If
a
hook on the installation bracket interferes
with the unit, bend and flatten it with
a
nipper or
similar tool.
Typical Mounting Brackets
Example 1
.... 1 -
ur--........._ .....
Example 2 Example 3
Affix the screws to the. marks.
Vehicles other than NISSAN and TOYOTA
In some cases the center panel may require modification. (Trimming, filing, etc.)
• Removing the Main Unit
When the main unit is to be removed, disassemble it in the reverse of the order in "INSTALLING THE
MAIN UNIT' (see page 48).
41
VRX485VD/MAX385VD