Clarion MAX385VD Owners & Installation Manual page 25

DVD Video Player Operations
Watching
a
DVD-Video
After disc loading, the play mode is automatically
engaged.
• When playback is not started, press the [OK]
~ button or touch the [~/II ] key.
~
• Button operation may differ depending on the
;} story of the disc.
3
~
• After the menu screen is displayed
~ For normal DVD-Video discs, the DVD menu
screen appears.
After the DVD menu screen is displayed, select
an item in the following operations and play it
back.
Showing the DVD PLA YER mode
screen
The DVD PLAYER mode screen is used to
control the playback mode from the screen.
1. Touch the screen.
The DVD PLAYER mode screen is displayed.
If you do not touch the screen for 5 seconds,
the display will return to the playback screen.
Showing the DVD menu
1. Showing the DVD PLAYER mode screen,
touch the [Menu] key during playback.
The DVD menu appears.
The displayed contents may differ depending
* on the DVD software.
• Example showing DVD menu display
25
VRX485VO/MAX385VO
Operating the DVD menu
You can select the button items displayed in the
DVD menu by directly touching it.
If the button items are hard to select correctly,
you can also operate them by using the remote
control directional buttons.
On the MAX385VD, you can press the volume
knob in momentarily, then turn it to change the
selected items on the screen. Press the [~/II]
button to select it.
On the VRX485VD, you can use the right knob
to change the selected items on the screen.
Press the right knob or [~/II] button to select it.
Stopping playback
1. Showing the DVD PLAYER mode screen,
touch the [ • ] key. Playback is stopped.
On the VRX485VD, you can also press the
[.] key on the front control panel.
2. To resume playback, press the
[~/II
] button.
Playback resumes from the scene where
playback is stopped.
Pausing playback
1. Press the [ OK] button or touch the
[~/II
]
key during playback.
Playback pauses.
2. To resume playback, press the [
~!II]
button
again.
Playback resumes.