Choosing Working Mode - Intermec EasyCoder 301 Installation And Operation Manual

Choosing Working
Mode
ERPLabel v. 2.0 for SAP R/3 – Installation & Operation Ed. 1
The preferred working mode depends on the printer to be used, the
application and preferences.
1. Decide which mode to use. The available options are shown in
the table below.
2. Locate the printer model to be used. Some printers support both
Fingerprint and Direct Protocol. If you do not use graphics Di-
rect Protocol is preferable.
3. Follow the instruction for the selected mode.
Hints
• Try Host Mode first. If the result is acceptable, stay with that.
• If you need to print large graphics printout, and are using slow
communication lines, try to use Stored Mode.
Printer/ Language
EasyCoder 201 II,
401, 501, 501 XP,
601, 601 XP
EasyCoder 201 II,
301, 401, 501,
501 XP, 601, 601 XP
EasyCoder 3240,
3400, 3440, 3600,
4400, 4420, 4440,
4630, 4830, 7421
Language Host Mode
Fingerprint Yes
Direct Protocol Yes
(no graphics)
IPL Yes
ERPLabel for SAP R/3
Stored Mode
No
Yes
Yes
7