Intermec EasyCoder 301 Installation And Operation Manual page 37

Intermec easycoder 301: install guide

Hide thumbs Also See for EasyCoder 301:

Table of Contents

Using ERPLabel

Test Print, cont'd.

ERPLabel v. 2.0 for SAP R/3 – Installation & Operation Ed. 1

Select ITF-file

Select the ITF file you generated by pressing the "..."button. Lo-

cated the file and accept.

Select Test Table

Select the table with the test records you created above.

Select Target Printer

To print out the test on your printer, you must use a Generic Text

driver. This will send the data without adding any additional for-

matting.

To print press the "Print" button.

ERPLabel for SAP R/3

Table of Contents