Installation - Intermec EasyCoder 301 Installation And Operation Manual

Installation

ERPLabel v. 2.0 for SAP R/3 – Installation & Operation Ed. 1
Prior to installing ERPLabel, you must have to LabelShop PRO
installed.
1. Put the disk 1 in your diskette drive.
2. Locate the Install.exe file using the Explorer, or run from the
Start – Run prompt.
3. ERPLabel will now automatically locate the current installation
by of LabelShop PRO.
4. The proposed path will be displayed. Press Yes if it is OK.
If you want to install it into another path, press the No button. You
will get a dialogue where the desired path can be entered.
Note:
The search will not include network drives. If LabelShop PRO
cannot be found, a manual search will be required.
ERPLabel for SAP R/3
4