Intermec CK30 Installation Manual page 20

Installing the PM4i (continued)
The EasyADC Console screen appears.
Double-click the Discovered
Devices folder. The Discovered
Devices screen appears showing
the components of the EasyADC
System and their IP addresses.
Right-click the printer icon and choose Delete.
Right-click the EasyADC Console icon on the taskbar and choose
Configure > Discover. The Console looks for the printer and connects it to
the network. The PM4i pulls the excess ribbon back in and prints a test label.
The red error light turns off and the blue light stays on, indicating that the
PM4i has been configured and added to the network.
Right-click the Discovered Devices screen and choose Refresh. The printer
icon appears.
38 39