Intermec CK30 Installation Manual page 10

Installing the Software (continued)
Click the arrow on the lower right
side of the screen. The Scan Unit of
Measure screen appears.
Choose Yes or No, and then click the right arrow to continue to the
next screen.
Continue through each of the
software configuration screens
to choose settings and enter
information from your Great
Plains questionnaire. When
you click the right arrow in the
Great Plains Version screen, the
Summary screen appears.
Click Save Configuration. A
message box appears asking if
you want to exit the application.
18
Click Yes. The installation continues and you are prompted to install
Wavelink Avalanche.
Follow the onscreen instructions to install Avalanche and accept default
settings. A message appears asking if you want to add a desktop shortcut.
Click No. A dialog box appears asking if you want to launch Avalanche
Enabler. Do not choose this option. The installation continues and you
®
are prompted to install LabelShop PRO 6.
Follow the onscreen instructions to install LabelShop PRO 6 and accept
all default settings. If prompted for a User Name and Company Name,
enter the name of your designated EasyADC System leader and your
company name.
Click Finish. The EasyADC
Configuration Wizard screen appears.
19