PRECAUTIONS DURING SERVICE (AVR-S510BT)
Initializing This Unit
Initialize this unit if you have replaced the microcomputer, one of the parts around the microcomputer, or the digital PCB.
1.
Press the power button ( X ) to turn off the power.
2.
Hold down buttons "SOUND MODE 1 " and "PRESET +" at the same time and press the power button to turn on the
power.
3.
Release the buttons after confirming that the display flashes in intervals of approximately 1 second.
The unit is initialized.
NOTE: • If the status in step 3 does not occur, start again from step 1.
• Initializing the device restores settings configured by the user to the factory settings.
Take note of your settings beforehand and reconfigure them after initialization.
[AVR-S510BT]
X
SOUND MODE 1
SOURCE SELECT
SOUND MODE
PHONES
ON / OFF
PRESET +
TUNER
TUNE
MODE
SLEEP
DIMMER
STATUS
PRESET CH
1
CBL/SAT
2
DVD/Blu-ray
3
GAME
4
Bluetooth
QUICK SELECT
BASS /
SETUP MIC
ADJUST
TREBLE
5V/ 1A
TONE CONTROL
13
MASTER VOLUME
AVR-S510BT
AV SURROUND RECEIVER