Special Mode (Avr-X520Bt / X518Ci); Special Mode Setting Button - Denon AVR-S510BT Service Manual

SPECIAL MODE (AVR-X520BT / X518CI)

Special mode setting button

b No. 1, 2 : H old down buttons A and B at the same time and press the power button ( X ) to turn on the power.
No. 3, 4 : Hold down buttons A, B and C for at least 3 seconds while the power is on.
Mode
1 Initialization
2 Version Display
Change Video Format
3
and Display Languge
3-1 Video Format
3-2 Language
4 Product Mode
4-1 Remote Lock
4-2 Tuning Step Change
4-3 OSD Update
Protection History
4-4
Display
4-5 Mic Mode
X
Button A Button B
PRESET +
TUNE +
TUNE -
PRESET +
↑
PRESET +
STATUS +
↑
↑
↑
↑
PRESET +
SOURCE SELECT
TUNER
PRESET CH
PHONES
f
Button C
TUNE +
DIMMER
TUNE + DIMMER
ー ー
ー ー
TUNE - TUNE +
ー ー
ー ー
ー ー
ー ー
ー ー
TUNE -, +
DIMMER
1 2
TUNE DIMMER STATUS CBL/SAT DVD/Blu-ray
QUICK SELECT
5V/ 1A
20
Contents
Backup data initialization is carried out.
(See page14 .)
Firmware versions such as Main, DSP or OSD
are displayed in the FL display. Errors are
displayed or when they occur.
(See page 21 .)
Select the mode shown below.
"Video Format" and "Language".
Select or change the "NTSC" or "PAL".
Default setting : E2/E1C PAL, E3 NTSC
Select or change the language:
AVR-X520 E2 "ENGLISH", "SPANISH" "FRENCH"
AVR-X520 / X518 E1C "CHINESE", "ENGLISH
Default setting : E3/E2 ENGLISH, E1C CHINESE
Select the mode shown below.
"Remote Lock", "Tuning Step Change", "OSD
Update", "Protection History Display" and "Mic
Mode".
Mode to prohibit the operation from the
remote control.
Switching of the Step of the tuning frequency
of the Tuner.
Power forced mode to update the OSD flash
ROM.
* Not for service.
Display of protection of occurrence history.
Mode that connects the input of the
microphone terminal to Speaker output.
* Not for service.
MASTER VOLUME
3 4
GAME Bluetooth
SETUP MIC
f