Tv Operations - Clarion DXZ276MP Owner's Manual

TV Operations

Note:
• The following operations are performed the same
as for radio mode:
Channel selection
Storing channels in memory
Calling channels from memory
Auto store
Preset scan
See "Radio Operations" (page 13-14) for details.
TV tuner functions
When an optional TV tuner is connected
through the CeNET cable, this unit controls all
TV tuner functions. To watch TV requires a TV
tuner and monitor.
Watching a TV
1. Press the [SRC] button and select the TV
mode.
2. Press the [BND] button to select the desired
TV band (TV1 or TV2). Each time the button
is pressed, the input selection toggles
between TV1 and TV2.
3. Press the [x] or [v] button to tune in the
desired TV station.
Watching a video
The TV tuner has a VTR input terminal to which
1 external device can be connected. Connect a
12 V video cassette player (VCP) or video
cassette recorder (VCR) to the TV tuner input
terminal.
The factory default setting is "TV".
1. Press and hold the [D] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [x] or [v] button to select "TV/
VTR".
3. Press and hold the [
or longer to set to "VTR".
4. To return to the TV broadcast, press and
hold the [D] button for 1 second or longer to
switch to the adjustment selection display.
5. Press the [x] or [v] button to select "TV/
VTR".
6. Press and hold the [
or longer to set to "TV".
26
DXZ276MP/DXZ376MP
] button for 1 second
] button for 1 second
Setting the TV Area
When you select the TV area (TV reception
area) TV tuner area setting changes.
1. Press and hold the [D] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [x] or [v] button to select "TV
AREA".
3. Press the [w] or [z] button to select the
reception area.
4. Press the [D] button to return to the previous
mode.
Setting the TV diver
You can change the reception setting for the TV
antenna connected to the TV tuner.
The factory default setting is "ON".
1. Press and hold the [D] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [x] or [v] button to select "TV
DIVER".
3. Press the [w] or [z] button to set to "ON" or
"OFF".
• ON:
Sets the diver setting to ON.
• OFF:
Sets the diver setting to OFF.
4. Press the [D] button to return to the previous
mode.