Ejecting A Cd; Loading A Cd - Clarion DXZ276MP Owner's Manual

CD/MP3/WMA Operations
Set the type of file to be played
(multi-session function)
When a single disc holds both normal CD type
tracks and MP3/WMA type tracks, use this
command to select which type of track to play.
Default setting is "M-SESS CD".
• When only one type of track (either music CD
or MP3/WMA) is recorded on a disc, selecting
either type will allow playback of the disc.
• When playing CCCD (copy-control CDs), set
to CD type.
1. Press and hold the [BND] button for 1
second or longer.
Each time the button is held pressed in this
way "M-SESS" will be displayed for 1
second, then "CD" or "MP3" appears in the
display, the playback type alternates
between CD type and MP3/WMA type.
• M-SESS CD
When playing music CD only.
• M-SESS MP3
When playing music MP3/WMA only.
2. When setting is completed, remove the disc
and reinsert it.
Disc-In-Play function
As long as the ignition key is turned to the ON or
ACC position, this function allows you to turn the
power to the unit and start playing the disc
automatically when the disc is inserted even if
the power is not turned on.
CAUTION
• Do not try to put your hand or fingers in
the disc insertion slot. Also never insert
foreign objects into the slot.
• Do not insert discs where adhesive comes
out from cellophane tape or a rental CD
label, or discs with marks where
cellophane tape or rental CD labels were
removed. It may be impossible to extract
these discs from the unit and they may
cause the unit to break down.
16
DXZ276MP/DXZ376MP

Ejecting a CD

1. Press the [Q] to eject the CD. Take it out
from the ejected position. "EJECT" appears
in the display.
Notes:
• If a CD (12 cm) is left in the ejected position for 15
seconds, the CD is automatically reloaded. (Auto
reload)
• If you force a CD into before auto reloading, this
can damage the CD.
Listening to a disc already loaded
in the unit
Press the [SRC] button to select the CD/MP3/
WMA mode.
When the unit enters the CD/MP3/WMA mode,
play starts automatically.
If there is no disc loaded, the indication "NO
DISC" appears in the display.
The mode changes each time the [SRC] button
is pressed. (Modes are not displayed for
equipment that is not connected.)
Radio CD/MP3/WMA
changer) (DVD changer)
Radio ...

Loading a CD

1. Insert a CD into the centre of the CD SLOT
with the labeled side facing up. "LOADING"
appears in the display, the CD enters into the
slot, and the play starts.
Notes:
• Never insert foreign objects into the CD SLOT.
• If the CD is not inserted easily, there may be
another CD in the mechanism or the unit may
require service.
• Discs not bearing the
CD-ROMs cannot be played by this unit.
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
(iPod BB) (CD
(TV) AUX
or mark and