Table of Contents
Advertisement
O O p p e e r r a a t t i i n n g g P P r r o o c c e e d d u u r r e e s s
Module Layout Screen Status Conditions
Table 5. Module status conditions
Module in simultaneous mode; compressors
on
Module in heating mode; compressors off
Isolation Valves:
- Valve LED is green = valve is open
- Valve LED is gray = valve is closed
Modules Overview Screens
Each module controlled by the microprocessor
controller has its own module screen within which the
operator can monitor and maintain conditions affecting
that module. Primary module access is made through
the system control screen containing multiple controls
and indicators:
36
On the home screen, pressing the alarm button
displays the active alarms screen. See
Compressor 1 is in alarm and Compressor 2 is
on
Refrigeration circuit in normal state; both
compressors on
On the home screen, pressing the M M 1 1 button displays
the Module #1 (primary module) overview 1 screen.
Use the left and right scrolling buttons to scroll through
the overview screens.
Figure 20, p.
Module turned off by alarm and unavailable;
compressors off
Module in cooling mode; compressors off
Refrigeration circuit in alarm state;
compressors off
ARTC-SVX005B-EN
35.
Advertisement
Table of Contents
