Device - Lexmark CS943 User Manual

Use printer menus

Device

Preferences
Menu item
Display Language
[List of languages]
Country/Region
[List of countries or regions]
Run initial setup
Off*
On
Keyboard
Keyboard Type
[List of languages]
Displayed information
Display Text 1 (IP Address*)
Display Text 2 (Date/Time*)
Custom Text 1
Custom Text 2
Date and Time
Configure
Current Date and Time
Manually Set Date and Time
Date Format (MM‑DD‑YYYY*)
Time Format (12 hour A.M./P.M.*)
Time Zone
UTC (GMT) Offset
DST Start
DST End
DST Offset
Network Time Protocol
Enable NTP (On*)
NTP Server
Enable Authentication (None*)
Key ID
Password
Paper Sizes
US*
Metric
Screen Brightness
20–100% (100*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the language of the text that appears on the display.
Identify the country or region where the printer is configured
to operate.
Run the setup wizard.
Select a language as a keyboard type.
Note: All the Keyboard Type values may not appear or may
require special hardware to appear.
Specify the information to appear on the home screen.
Configure the printer date and time and network time protocol.
Notes:
•
UTC (GMT) Offset, DST Start, DST End, and DST Offset
appear only when Time Zone is set to (UTC+user)
Custom.
•
Key ID and Password appear only when Enable
Authentication is set to MD5 key.
Specify the unit of measurement for paper sizes.
Note: The country or region selected in the initial setup
wizard determines the initial paper size setting.
Adjust the brightness of the display.
175