Programmable System Parameters; Ignition Controlled Door Locking; Ignition Controlled Door Unlocking; Logic Sensor Ii Warn Away Level - Clarion UNGO MS5500 Install Manual

Clarion automobile alarm user manual
Hide thumbs Also See for UNGO MS5500:
Table of Contents

Advertisement

Programmable System Parameters

Step
Function
1

Ignition Controlled Door Locking

2

Ignition Controlled Door Unlocking

Logic Sensor II Warn Away Level

3
4

Audible Tamper Alert Report

5
Door Unlock Pulse
6
Auto Rearm
Entry Delay for Passive Arming
7
8
Trunk Bypass
9
Illuminated Exit
10
Auxiliary Function 2 output
11
Logic Sensor Defeat
Transmitter Operating Mode
12
* default setting
1. Ignition Controlled Door Locking. Selects whether or not the system automatically locks
the doors when the ignition is turned on. When selected, the Ignition Controlled Door
Locking feature will automatically lock the doors 10 seconds after the ignition key is turned
on.
To prevent the keys from being locked inside the vehicle when Ignition Controlled Door
Locking is on:
• The system will not lock the doors if any door is open when the ignition is turned on.
• The system will not lock the doors if any door is opened during the 10 second
countdown.
2. Ignition Controlled Door Unlocking. Selects whether or not the system automatically
unlocks the doors when the ignition is turned off. When selected, the Ignition Controlled
Door Unlocking feature will automatically unlock the doors when the ignition key is turned
off.
3. Logic Sensor II - Warn Away Level. Allows you to set the level of the Logic Sensor II's
Warn Away sensitivity. When High is selected, a lighter impact will produce a warning chirp,
while the Low setting requires a stronger impact.
4. Audible Tamper Alert Report. When Audible Tamper Alert is selected, the siren will chirp to
indicate which zone had triggered the system, upon disarming.
If the system was triggered, the siren will emit one long chirp, followed by a series of short
chirps indicating the violated zone.
no chirp = ignition
1 chirp
= door
Status LED
Button 1
flashing
solid*
(quickly)
ON
ON
High
audible
LED only
single pulse
double pulse
OFF
no delay
10 seconds
OFF
ON
momentary
latched
OFF
Standard
Convenience
flashing
(slowly)
OFF
OFF
Low
ON
ON
OFF
30 seconds
Aux 1
Aux 2
Driver Door
Priority
MS5500 Installation Manual - Page 17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents