Table of Contents
Advertisement
➜
table of zones
A zone is represented by the number of LED flashes used by the
system to identify a particular type of input. Standard input
assignments are listed in the following table, along with spaces to
write in any optional sensors or switches that have been installed.
ZONE
(Number of
LED Flashes)
DESCRIPTION
1 1
Trunk Pin
2 2
Instant trigger - a heavier impact
detected by the shock sensor
3 3
Door switch trigger
4 4
Instant trigger - for optional
sensors
5 5
Ignition trigger
6 6
Hood Pin
➜
interpreting zone diagnostics
Warn Away responses are not reported by arming or disarming
diagnostics. If you receive a Bypass notification when arming or
a Tamper Alert notification when disarming, look at the LED.
Active or triggered zones will be indicated by a pattern of blinks
by the LED.
Example
If zone 3 was active or triggered, the LED will blink three times
with a two-second pause. Then it will blink three times again,
and repeat until the ignition is turned on.
© 2005 directed electronics, inc.
DEALER-INSTALLED
OPTIONS
33
Hide quick links:
Advertisement
Table of Contents
