Download Print this page

Advertisement

Quick Links

Haven Chair
Teak Arm
Assembly Guide

Advertisement

loading

Summary of Contents for neighbor Haven Chair Teak Arm

  • Page 1 Haven Chair Teak Arm Assembly Guide...
  • Page 2 Components Assembly Instructions Contact Frame Boxes Chair - Teak Arm Frame (1) Cushion Boxes Cushions - Armless/Teak Arm (1)
  • Page 3 Components Assembly Instructions Contact Parts Module Back Support Chair - Teak Arm Frame Box Module Base Module Roped Back Chair - Teak Arm Frame Box Chair - Teak Arm Frame Box Right Teak Arm Left Teak Arm Chair - Teak Arm Frame Box Chair - Teak Arm Frame Box...
  • Page 4 Components Assembly Instructions Contact Cushions Module Back Cushion Armless/Teak Arm Cushions Box Module Base Cushion Armless/Teak Arm Cushions Box Hardware Tools 30mm Hex Bolt Chair - Teak Arm Frame Box Allen Wrench Chair - Teak Arm Frame Box 40mm Hex Bolt Chair - Teak Arm Frame Box...
  • Page 5: Assembly Tips

    Components Assembly Instructions Contact Assembly Tips Use caution when lifting Assemble on a soft surface Two-person lift is recommended. The boxes We recommend assembling your furniture on a and product are both large and heavy. soft surface such as a rug or a towel. The wood frame can scratch against harsh textures like Lay everything out before you begin brick or concrete.
  • Page 6 Components Assembly Instructions Contact Backrest slots should align with the back of the armrest, as shown Connect base to left arm Place the Left Teak Arm on a soft surface with the armrest facing down. Gently insert the Module Base into the arm’s inner slots.
  • Page 7 Components Assembly Instructions Contact Connect right arm to base Gently insert the Right Teak Arm by sliding it into the Module Base until its holes are aligned with the base’s corresponding threaded holes.
  • Page 8 Components Assembly Instructions Contact 30mm Hex Bolt Fasten arms to base Using the Allen Wrench provided, fasten the Module Base to the Left and Right Teak Arms with four 30mm Hex Bolts per side.
  • Page 9 Components Assembly Instructions Contact Drain holes face down Secure roped back to base Insert the Module Roped Back into the slots of the Module Base.
  • Page 10 Components Assembly Instructions Contact Attach back support to roped back Lower the Module Back Support onto the Module Roped Back by fitting the tabs into their corresponding slots, then insert.
  • Page 11 Components Assembly Instructions Contact 40mm Hex Bolt Fasten back support to arms Fasten the Module Back Support to the Teak Arms with two 40mm Hex Bolts per side.
  • Page 12 Components Assembly Instructions Contact Add cushions With the zipper seam facing backward, add the base cushion. Finally, add the back cushion. Relax! You’re ready to enjoy your chair.
  • Page 13 Components Assembly Instructions Contact Contact Have a question, comment, feedback? We love hearing from customers. support@hineighbor.com hineighbor.com...