Related Manuals for neighbor The Loveseat
Summary of Contents for neighbor The Loveseat
- Page 1 Loveseat Assembly Guide B O X E S N E E D E D : Left Arm Module Frame Left Arm Module Cushions Right Arm Module Frame Right Arm Module Cushions...
- Page 2 Components Assembly Instructions Contact Parts Small Leg Right Arm Module Frame Box Large Base Large Roped Back Large Leg Left Arm Module Box, Right Arm Module Frame Box Left Arm Module Frame Box, Right Arm Module Frame Box Right Arm Module Box Left Arm Module Back Support Left Arm Module Frame Box Left Arm...
- Page 3 Components Assembly Instructions Contact Cushions The Chair Cushions Box Back Cushion Arm Cushion Base Cushion Hardware Tools Left Arm Module Box, Right Arm Module Frame Box Left Arm Module Box, Right Arm Module Frame Box Hex bolt Screw Allen Wrench Phillips Head Screwdriver * Not included...
-
Page 4: Assembly Tips
Components Assembly Instructions Contact Assembly Tips Product Care • Spray on a mild cleaning solution of soap Exercise caution while lifting Caring for teak Two-person lift is recommended. Both the Unfinished teak will gradually change color (such as Woolite® or Dawn®) and water. boxes and the product itself are large and heavy from a honey gold to a silver-grey patina. - Page 5 Components Assembly Instructions Contact Connect large bases to arms Place both the left and right arm components on a soft surface, verifying that the two screw holes are facing upward. Gently insert the long bases into each arm’s inner slots.
- Page 6 Components Assembly Instructions Contact Fasten arms to bases Using the Allen wrench provided, fasten the large bases to both the left and right arm components with two hex bolts.
- Page 7 Components Assembly Instructions Contact Fasten small leg to large bases Using the Allen wrench, fasten the small leg to front of the Right Arm Module’s base with two hex bolts. Be sure to leave two threaded holes on the small leg exposed as demonstrated.
- Page 8 Components Assembly Instructions Contact Fasten large leg to large bases Stand the Right Arm Module base upright on its legs. Then with the Allen wrench, fasten the large leg to the large base with two hex bolts. Be sure to leave two threaded holes on the large leg exposed as demonstrated.
- Page 9 Components Assembly Instructions Contact Connect large and small bases Gently slide Left Arm Module’s base into the slotted sections on the Right Arm Module’s large and small legs. Slide base until its pre-drilled holes align with the threaded holes on the legs.
- Page 10 Components Assembly Instructions Contact Fasten large and small bases After holes on the bases are aligned with the corresponding threaded holes on each leg, use the Allen wrench to fasten them together with two hex bolts per side.
- Page 11 Components Assembly Instructions Contact Drain hole faces down Secure roped backs to large bases Insert the lower brackets of the corresponding roped back components into the slots of each base.
- Page 12 Components Assembly Instructions Contact Attach back supports to roped backs Lower each back support onto the roped backs. Align slots underneath each back support with the corresponding roped back’s top bracket. Then insert bracket into the slot.
- Page 13 Components Assembly Instructions Contact Fasten back support to arms and large legs With your Allen wrench, gently fasten back support components onto large leg with four hex bolts. Aligning the pre-drilled holes on the arm components with the holes on the L-bracket. Then, with a Phillips Head screwdriver, gently secure with four screws.
- Page 14 Components Assembly Instructions Contact Add cushions First with zipper seams facing backward, add arm cushions to each side. Thread the cushion laces around the roped back posts and tie them down. Then add both base cushions. Finally, add the back cushions.
- Page 15 Components Assembly Instructions Contact Contact Have a question, comment, feedback? We love hearing from customers. support@hineighbor.com hineighbor.com...