Advertisement
Quick Links
Advertisement
Related Manuals for neighbor Haven Loveseat Teak Arm
Summary of Contents for neighbor Haven Loveseat Teak Arm
- Page 1 Haven Loveseat Teak Arm Assembly Guide...
- Page 2 Components Assembly Instructions Contact Frame Boxes Left Module - Teak Arm Frame (1) Right Module - Teak Arm Frame (1) Cushion Boxes Cushions - Armless/Teak Arm (2)
- Page 3 Components Assembly Instructions Contact Parts Short leg Module Back Support Right Module - Teak Arm Frame Box Left Module - Teak Arm Frame Box Right Module - Teak Arm Frame Box Long leg Right Module - Teak Arm Frame Box Module Base Module Roped Back Left Module - Teak Arm Frame Box...
- Page 4 Components Assembly Instructions Contact Cushions Module Back Cushion Armless/Teak Arm Cushions Box Module Base Cushion Armless/Teak Arm Cushions Box Hardware Tools 30mm Hex Bolt Left Module - Teak Arm Frame Box Allen Wrench Right Module - Teak Arm Frame Box All Frame Boxes 40mm Hex Bolt Left Module - Teak Arm Frame Box...
-
Page 5: Assembly Tips
Components Assembly Instructions Contact Assembly Tips Use caution when lifting Assemble on a soft surface Two-person lift is recommended. The boxes We recommend assembling your furniture on a and product are both large and heavy. soft surface such as a rug or a towel. The wood frame can scratch against harsh textures like Lay everything out before you begin brick or concrete. - Page 6 Components Assembly Instructions Contact Backrest slots should align with the back of the armrest, as shown Connect bases to arms Place both the Left and Right Teak Arms on a soft surface with the armrests facing down. Gently slide the Module Bases into each arm’s inner slots.
- Page 7 Components Assembly Instructions Contact 30mm Hex Bolt Fasten arms to bases Using the Allen Wrench provided, fasten the Module Bases to the Left and Right Teak Arms with four 30mm Hex Bolts per side.
- Page 8 Components Assembly Instructions Contact 30mm Hex Bolt Fasten short leg to base Using the Allen Wrench provided, fasten the Short Leg to the front of the Module Base with two 30mm Hex Bolts. Be sure to leave two threaded holes exposed as demonstrated.
- Page 9 Components Assembly Instructions Contact 30mm Hex Bolt Fasten long leg to base Stand the assembled components upright. With the Allen Wrench provided, fasten the Long Leg to the Module Base with two 30mm Hex Bolts. Be sure to leave two threaded holes exposed as demonstrated.
- Page 10 Components Assembly Instructions Contact Connect bases Gently slide the assembled arm components together. Slide base until its pre-drilled holes align with the threaded holes on the corresponding legs.
- Page 11 Components Assembly Instructions Contact 30mm Hex Bolt Fasten bases After holes on the bases are aligned with the corresponding threaded holes on each leg, use the Allen Wrench provided to fasten them together with two 30mm Hex Bolts per side. 30mm Hex Bolt...
- Page 12 Components Assembly Instructions Contact Drain holes face down Secure roped backs to bases Insert the Module Roped Backs into the slots of the Module Bases.
- Page 13 Components Assembly Instructions Contact Attach back supports to roped backs Lower each Module Back Support onto the Module Roped Backs by fitting the tabs into their corresponding slots, then insert.
- Page 14 Components Assembly Instructions Contact 40mm Hex Bolt Fasten back supports Fasten the Module Back Supports to the center Long Leg with four 30mm Hex Bolts. Then fasten Module Back Supports to Teak Arms with two 40mm Hex Bolts per side. 30mm Hex Bolt...
- Page 15 Components Assembly Instructions Contact Add cushions With the zipper seam facing backward, add both base cushions. Finally, add the back cushions. Relax! You’re ready to enjoy your loveseat.
- Page 16 Components Assembly Instructions Contact Contact Have a question, comment, feedback? We love hearing from customers. support@hineighbor.com hineighbor.com...