Advertisement
Quick Links
The 4-Piece
Sectional
Assembly Guide
B O X E S N E E D E D :
(1)
Left Arm Module Frame
(1)
Right Arm Module Frame
(1)
Armless Module Frame
(1)
Corner Module Frame
(1)
Left Arm Module Cushions
(1)
Right Arm Module Cushions
(1)
Armless Module Cushions
(1)
Corner Module Cushions
Advertisement
Related Manuals for neighbor The 4-Piece Sectional
Summary of Contents for neighbor The 4-Piece Sectional
- Page 1 The 4-Piece Sectional Assembly Guide B O X E S N E E D E D : Left Arm Module Frame Left Arm Module Cushions Right Arm Module Frame Right Arm Module Cushions Armless Module Frame Armless Module Cushions Corner Module Frame Corner Module Cushions...
- Page 2 Components Assembly Instructions Contact Parts Long Base Short Base Right Arm Corner Base Left Arm Left Arm Module Frame Box Armless Module Frame Box Right Arm Module Frame Box Corner Module Frame Box Left Arm Module Frame Box Right Arm Module Frame Box Small Roped Back Corner Block Leg Large Roped Back...
- Page 3 Components Assembly Instructions Contact Cushions Base Cushion Back Cushion Arm Cushion Left Arm Module Cushion Box (1) Left Arm Module Cushion Box (1) Left Arm Module Cushion Box (1) Right Arm Module Cushion Box (1) Right Arm Module Cushion Box (1) Right Arm Module Cushion Box (1) Armless Module Cushion Box (1) Armless Module Cushion Box (1)
- Page 4 Components Assembly Instructions Contact Hardware Hex Bolt Long Hex Bolt Screw L-Bracket All Frame Boxes Corner Module Frame Box Left Arm Module Frame Box Left Arm Module Frame Box Right Arm Module Frame Box Right Arm Module Frame Box Tools Allen Wrench Phillips Head Screwdriver All Frame Boxes...
-
Page 5: Product Care
Components Assembly Instructions Contact Assembly Tips Product Care • Spray on a mild cleaning solution of soap Exercise caution while lifting Caring for teak Two-person lift is recommended. Both the Unfinished teak will gradually change color (such as Woolite® or Dawn®) and water. boxes and the product itself are large and heavy from a honey gold to a silver-grey patina. - Page 6 The Haven Collection is designed to be easily adaptable to your space. The 4-Piece Sectional can be configured to be either left or right side facing. To build yours, choose the orientation you’d like by assembling in sections of two, starting at the Corner Module (p.
- Page 7 Armless/Corner Components Assembly Instructions Contact Armless/ Corner...
- Page 8 Armless/Corner Components Assembly Instructions Contact Long Hex Bolt Fasten legs to corner base Using the Allen wrench, fasten two large legs and the assembled corner block leg onto the corner base with hex bolts. Use two long hex bolts when fastening corner Corner Block base to corner leg.
- Page 9 Armless/Corner Components Assembly Instructions Contact Fasten legs to left side of short base With the Allen wrench, thread two hex bolts through the holes in the front left side of the short base. Fasten to the short leg. Repeat this with the large leg on the back left corner of the small base.
- Page 10 Armless/Corner Components Assembly Instructions Contact Connect small base with corner base Gently slide small base into the grooves located on the large leg and corner block of the corner base. Align the holes located on the small base with the corresponding threaded holes on the corner base.
- Page 11 Armless/Corner Components Assembly Instructions Contact Fasten small base to corner base Secure the two bases by inserting four bolts through the holes on the small base. With the Allen wrench, gently fasten them to the four threaded holes located on the corner base.
- Page 12 Armless/Corner Components Assembly Instructions Contact Drain hole faced down Secure roped backs to bases Insert the lower brackets of the small roped back components into the slots of the short and corner base.
- Page 13 Armless/Corner Components Assembly Instructions Contact Attach back supports to roped backs Insert armless module back support and corner module back support onto the top brackets located on roped backs by inserting them into corresponding slots underneath the back supports.
- Page 14 Armless/Corner Components Assembly Instructions Contact Long Hex Bolt Fasten backs to large legs With your Allen wrench, gently fasten armless back support and corner module back support onto the threaded holes on the top of the large legs with hex bolts. Use two long hex bolts in the back in the far corner of the corner module back support.
- Page 15 Corner/Armless Components Assembly Instructions Contact Corner/ Armless...
- Page 16 Corner/Armless Components Assembly Instructions Contact Long Hex Bolt Fasten legs to corner base Using the Allen wrench, fasten two large legs and the assembled corner block leg onto the corner base with hex bolts. Use two long hex bolts when fastening corner base to corner leg.
- Page 17 Corner/Armless Components Assembly Instructions Contact Fasten legs to left side of short base With the Allen wrench, thread two hex bolts through the holes in the front left side of the short base. Fasten to the short leg. Repeat this with the large leg on the back left corner of the small base.
- Page 18 Corner/Armless Components Assembly Instructions Contact Connect small base with corner base Gently slide small base into the grooves located on the large leg and corner block of the corner base. Align the holes located on the small base with the corresponding threaded holes on the corner base.
- Page 19 Corner/Armless Components Assembly Instructions Contact Fasten small base to corner base Secure the two bases by inserting four bolts through the holes on the small base. With the Allen wrench, gently fasten them to the four threaded holes located on the corner base.
- Page 20 Corner/Armless Components Assembly Instructions Contact Drain hole faced down Secure roped backs to bases Insert the lower brackets of the small roped back components into the slots of the short and corner base.
- Page 21 Corner/Armless Components Assembly Instructions Contact Attach back supports to roped backs Insert armless module back support and corner module back support onto the top brackets located on roped backs by inserting them into corresponding slots underneath the back supports.
- Page 22 Corner/Armless Components Assembly Instructions Contact Long Hex Bolt Fasten backs to large legs With your Allen wrench, gently fasten armless back support and corner module back support onto the threaded holes on the top of the large legs with hex bolts. Use two long hex bolts in the back in the far corner of the corner module back support.
- Page 23 Left Arm Components Assembly Instructions Contact Left Arm...
- Page 24 Left Arm Components Assembly Instructions Contact Connect large base to left arm Place the left arm component on a soft surface, verifying that the two screw holes inside the arm are facing upward. Gently insert the long base into the arm’s inner slots located on the inside of the two leg components.
- Page 25 Left Arm Components Assembly Instructions Contact Fasten large base to left arm Using the Allen wrench, fasten the large base to both leg components with four hex bolts.
- Page 26 Left Arm Components Assembly Instructions Contact Connect large and small bases Gently slide the assembly into the slotted sections on the Armless Module’s adjacent large and small legs. Slide base until its pre-drilled holes align with the threaded holes on the corresponding legs.
- Page 27 Left Arm Components Assembly Instructions Contact Fasten large base and secure roped back Drain hole faced down component After holes on the bases are aligned with the corresponding threaded holes on each leg, use the Allen wrench to fasten them together with two hex bolts on the front and back.
- Page 28 Left Arm Components Assembly Instructions Contact Attach back support to roped back Lower the Left Arm back support onto the roped back. Align slots underneath each back support with the corresponding roped back’s top bracket. Then insert bracket into the slot.
- Page 29 Left Arm Components Assembly Instructions Contact Fasten left arm back support to arm and large leg With your Allen wrench, gently fasten back support components onto large leg with two hex bolts. Next, align the pre-drilled holes on the left arm with the holes on the L-bracket.
- Page 30 Right Arm Components Assembly Instructions Contact Right Arm...
- Page 31 Right Arm Components Assembly Instructions Contact Connect large base to right arm Place the right arm component on a soft surface, verifying that the two screw holes are facing upward. Gently insert the long base into the arm’s inner slots.
- Page 32 Right Arm Components Assembly Instructions Contact Fasten large base to right arm Using the Allen wrench, fasten the large base to both legs of the right arm component with four hex bolts.
- Page 33 Right Arm Components Assembly Instructions Contact Connect large base to corner base Gently slide the assembly into the slotted sections on the corner block and large leg. Slide base until its pre-drilled holes align with the threaded holes on the corresponding legs.
- Page 34 Right Arm Components Assembly Instructions Contact Fasten large base to corner base After holes on the bases are aligned with the corresponding threaded holes on each leg, use the Allen wrench to fasten them together with two hex bolts on the front and back.
- Page 35 Right Arm Components Assembly Instructions Contact Drain hole faced down Secure roped back component Insert the lower brackets of the large roped back into the slots in the base. Make sure the drain holes are faced down toward the seat.
- Page 36 Right Arm Components Assembly Instructions Contact Attach back support to roped back Lower the Right Arm back support onto the roped back. Align slots underneath each back support with the corresponding roped back’s top bracket. Then insert bracket into the slot.
- Page 37 Right Arm Components Assembly Instructions Contact Fasten right arm back support to arm and large leg With your Allen wrench, gently fasten back support components onto large leg with two hex bolts. Next, align the pre-drilled holes on the right arm with the holes on the L-bracket.
- Page 38 Right Arm Components Assembly Instructions Contact Add cushions First with zipper seams facing backward, add arm cushions to your sectional. Thread the cushion laces around the roped back posts and tie them down. Then add base cushions. Finally, add the two back cushions. Relax! You’re finished.
- Page 39 Components Assembly Instructions Contact Contact Have a question, comment, feedback? We love hearing from customers. support@hineighbor.com hineighbor.com...