Fisher & Paykel FABRICSMART WA1068P Installation Manual page 47

Solving operating problems
PROBLEM
Machine is
continually going
out of balance
Too much or too
little water when
filling on auto
water level
Machine is making
noises
Small puddle
coming from
under the machine
TROUBLESHOOTING
POSSIBLE CAUSES
Machine may not be level.
Too much water for the load
The machine needs to
determine the correct water
level for the load.
Some loads do not
suit 'Auto' water level,
eg pillows.
Banging.
Other noises.
The water level is too high
for the amount of clothes
and has caused excessive
splashing.
Large bulky garments
(eg pillows duvet) can cause
splashing.
WHAT TO DO
Check the machine is level and does
not rock in any direction, refer to
'Levelling instructions'.
Ensure an appropriate water level is
selected for the load size (or select
'Auto' water level).
Refer to 'Out of balance recovery
routine' to change the out of
balance recovery mode.
Refer to the 'Wash options' for more
information.
Manually select the most
appropriate water level for the load.
Load is out of balance. Touch
and redistribute the load.
Refer to 'Caring for your washer'.
Select a lower water level.
Wash on the
BULKY
cycle.
47