Fisher & Paykel FABRICSMART WA1068P Installation Manual page 35

2
3
Controlled Cold
If your incoming cold water temperature is very low and you choose to do a 'Cold' wash,
the wash would be less effective. The
adding a small amount of hot water to raise the temperature of the wash to approximately
20°C.
To programme the Controlled Cold temperature option:
1
CHANGING PRE-SET OPTIONS
CONTROLLED COLD
Wash Temp
OOB Recovery
EOC Beeps
Factory Reset
Select the wash temperature you want to
adjust, eg , by touching the
WARM
button. The digital display
WASH TEMP
screen shows the current setting.
Touch the
MORE
to increase or decrease to the desired
temperature. Each increment is equal to
approximately 1°C.
option solves this problem by
Enter the Option Adjustment mode
(refer to the
'OPTION ADJUSTMENT MODE'
for instructions).
Select the cycle.
HEAVY
or button
LESS
35