Fisher & Paykel FABRICSMART WA1068P Installation Manual page 21

How the fabric softener is dispensed
The fabric softener goes into the dispenser cup on the top of the agitator. During the rinse
the machine spins to release the fabric softener, delivering it down the agitator stem as the
machine fills for the final deep rinse.
If fabric softener is not added to the washer correctly, it may contribute to 'scrud'
(described below).
Note: The 'Bulky' and 'Quick' cycles and 'Eco Rinse' option are not designed to be used
with fabric softener as the fabric softener will not be dispersed correctly.
How much fabric softener?
Always follow the manufacturer's recommendations on the fabric softener packaging for
the correct dosage. The ring on the dispenser cup is a guide only for the maximum amount
of fabric softener to add for a full load. Smaller loads require less fabric softener.
Cleaning the dispenser
When using fabric softener, rinse your dispenser at the end of each wash.
1
WASH PREPARATION
Separate the cup from the dispenser body by
pushing downward on the base of the cup.
Rinse both parts of the dispenser using warm
soapy water.
21