Fisher & Paykel FABRICSMART WA1068P Installation Manual page 15

Time to go
Your FabricSmart™ washer will display how many minutes a wash cycle has remaining, so
that you can tell at a glance when your washing will be finished. Once you have selected
your wash cycle and options, the time the wash cycle will take to complete will be
displayed. Please be aware that actual cycle times may vary as they are influenced by a
number of factors, eg the flow rate of your water supply, the load size and cycle selection.
Keylock mode
Keylock can be used to lock the buttons on your FabricSmart™ washer when not in use. This
will avoid accidental button pushes from items left on the lid of the washer and also from
any little fingers.
To turn Keylock mode
1
If Keylock mode is activated:
1
2
CONTROL PANEL
or :
ON OFF
Touch and hold the
When activated, the light above the
is illuminated.
To turn your washer on, touch and hold the
button for two seconds. This will activate
the display panel.
KEYLOCK
activated but let you select your wash cycle
options and start the cycle.
To pause your washer at any time during
the cycle, touch and hold the
two seconds, or touch the
quick succession.
button for two seconds.
button
will remain
button for
button twice in
15