Setting Of Printer Flags - Citizen Model CMP-10 Command Reference Manual

GS ) n m
[Function]
[Code]
[Range]
[Outline]
[Caution]

Setting of printer flags

<1D>H<29>H<n><m>
{0 =< n =< 8(Hex)}
{m = 0 or 1(Hex)}
This model has 8 memory switches and selecting, releasing, and changing a function
is available with this command.
Memory switch setting is retained even after printer power off.
n specifies the number of memory switch to be operated.
m specifies a selection.
The contents of individual memory switches are as shown below.
Memory Switch
1
2
3
4
5
6
7
8
The setting of the changed memory switch is enabled by resetting the power switch.
No. 8 is only for Japanese model.
OFF (0)
Slach 0
CR is ignored
Default font A
Prints "Low Battery".
ASB Invalid for default
Not in use
IrDA protocol enabled
Shift JIS for default
— 42 —
ON (1)
Normal 0
CR has the same action as LF
Default font B
Does not print "Low Battery".
ASB Valid for default
IrDA protocol disabled
JIS for default