Collective Specifying Printing Mode - Citizen Model CMP-10 Command Reference Manual

ESC ! n
[Function]

Collective Specifying Printing Mode

[Code] <1B>H<21>H<n>
[Range] {0 =< n =< FF(Hex)}
[Outline] Printing mode is assigned.
Each n bit indicates the following:
[Caution] • With double height and double width being specified simultaneously, double wide
• An underline is attached to the full character width, which, however, is not attached
• The underline width is as having been specified by <ESC ->. (The default setting is
• n case that double wide character and normal character exist in same one line, the
[Default] n = 0
[See Also] ESC E, ESC –
Bit
0 Character Font
1 Undefined
2 Undefined
3 High-lighting
4 Double height
5 Double width
6 Undefined
7 Underline
and double high characters are consisted.
to the part having been skipped by the horizontal tab.
Neither is it attached to 90°-right-turned characters.
1 dot width.)
layout of underline is consistent one.
Function
— 9 —
Value
0 1
Font A Font B
Canceled Specified
Canceled Specified
Canceled Specified
Canceled Specified