Chapter 1 Setup; Unpacking And Setting Up The Printer - Citizen GSX-190 User Manual

Chapter 1
Setup
Before unpacking your printer any further, take a few
moments to consider where you plan to put it.
* Choose a flat, stable desk or printer stand that also
accommodates your paper supply. Be sure there is enough room
around the printer to allow the paper to flow easily in and out.
* If you are using a wooden table, protect the surface from
possible damage by placing a mat under the printer.
* Position the printer so that the power cord and computer cable
do not interfere with the paper flow.
* Avoid sudden, severe changes in temperature and humidity, as
well as direct sunlight, dust and grease. Pick a clean area for
daily operations.
* Select a steady source of 120-volt electricity and check for other
appliances that may be using the same circuit. Copiers, heaters,
air conditioners, and other motorized equipment can cause
power fluctuations that may interfere with your printing
projects.

Unpacking and Setting Up the Printer

Unpack the printer, and save all original packing materials. They
are specially designed to protect the printer and will make
repacking easy if you ever need to ship the printer.
________________________________________________________ 10