Esc ! N ( Collectively Specifying The Printing Mode ) - Citizen CT-S280 Command Reference Manual

ESC ! n
[Function]
[Code]
[Range]
[Outline]
[Caution]
[Default]
[See Also]
Collectively specifying the printing mode
<1B>H<21>H<n>
0≤n≤255
Printing mode is assigned.
Bit Function
0 Character Font
1 Undefined
2 Undefined
3 Emphasis
4 Double height
5 Double width
6 Undefined
7 Underline
• With double height and double width being specified simultaneously, quadruple
characters are created.
• An underline is attached to the full character width, which, however, is not attached
to the part having been skipped by the horizontal tab (HT). Neither is it attached to
90°-right-turned characters.
• The underline width is as specified by the ESC – command. (The default setting is 1
dot width.)
• Setting by this command is invalid for Kanji except setting and canceling of
enhanced printing.
• In case characters with different vertical magnification ratios coexist on the same
line, they are printed on the same base line.
• ESC E, ESC M, ESC –, and GS ! can individually set or cancel the mode but the
command processed last is valid.
• Setting or canceling of enhanced 3rd bit is valid for alphanumeric and kana and kanji.
Other print mode is valid only for alphanumeric and kana characters.
Setting MSW3-7 to ON allows the relation between length and width for a
•
character to be reversed when specifying 90°-right-turned characters.
n = 0
ESC E, ESC –, GS !
0
Font A (12 x 24)
—
—
Canceled
Canceled
Canceled
—
Canceled
- 18 -
Value
1
Font B (9 x 24)
—
—
Specified
Specified
Specified
—
Specified