Navigating The Menu System - Citizen CLP-8301 User Manual

Chapter 5 Power ON and Using the Control Panel
Ready mode
The printer is in Ready mode after power is switched on and the self-test is performed.
READY
The LCD (Display) shows "READY" and the READY LED is lit. In this state, you can
perform the media feed, printing stop/restart etc using the keys on the control panel. (See
P12)
The display shows the name of the receiving interface when data is received from the host
READY
Parallel
computer. In this state, the printer receives and processes the information accordingly.
If no data is received for 5 seconds, the printer returns to Ready mode with no interface
READY
RS-232C
selected and continues to scan all installed interfaces for incoming data.
Menu mode
The printer enters the Menu mode when the
* Page
Setup
can access the menu system and set the printer configuration and print attributes using the
keys on the control panel. Pressing

5.4 Navigating the Menu System

The printer uses the same operating procedure to set various print attributes and configuration settings.
This section describes the relationship between the different menu levels as well as the functions of the
The Group Menu is the highest level of the menu tree and consists of six options as shown in the
diagram below. Beneath each Group Menu are a number of Menu Items from which a desired Value
can be selected, increased or decreased.
Group Menu selection
* Page
Setup
Pressing the
displays the first Menu Item within a Group Menu group. Pressing the
Group Menu selection.
DOWN DOWN DOWN DOWN DOWN DOWN DOWN DOWN
* System
Setup
MENU MENU MENU MENU
MENU MENU MENU MENU
or or
UP UP UP UP
UP UP UP UP
key moves to the next Group Menu available. Pressing the
again returns to Ready mode.
and keys on the control panel.
DOWN DOWN DOWN DOWN
* After
Print
MENU MENU
MENU MENU
or
UP UP
UP UP
MENU MENU
MENU MENU
DOWN DOWN
DOWN DOWN
- -
36
key is pressed. In this state, you
DOWN DOWN DOWN DOWN
* Inter- * Save
face Settings
MENU MENU
MENU MENU
MENU MENU MENU MENU
or
or
UP UP
UP UP
UP UP UP UP
UP UP
UP UP
or
* Test
key returns to the
Mode
key