Citizen CLP-8301 User Manual page 29

Chapter 4 Media (Paper) and Ribbon
(3) Make the maximum media loading space by moving both-side paper guides fully to their end.
Printhead assembly
Transparent sensor
guide
4 Install the inward-wound roll media as follows:
(1) Place the paper holder shaft onto the round cuts on the paper guides and paper holder shaft
supporting plates.
(2) Move both paper guides by both hands so that they come into contact with the edges of the roll
media (no clearance is made between paper guide and media).
(3) Lock the paper guides with the paper guide lock screw turned clockwise.
Transparent sensor
guide release lever
Printhead release lever
Paper guide lock
screw
- - - - - - - -
20
Paper guide (on both
sides)
Paper holder shaft
Paper guide (on
both sides)
Round cut on paper holder
shaft supporting plate (on
both sides)