Interfaces - Citizen CLP-8301 User Manual

Chapter 9 Specifications

9.2 Interfaces

1 Serial interface
Specifications
Transfer method:
Signal level:
Baud rate:
Data bits:
Start bits:
Stop bits:
Parity:
Connector:
XON/XOFF protocol
XON code output requirements:
·
Communication is enabled after power is turned ON.
·
Residual capacity of the buffer is 1K bytes or more after sending XOFF code.
·
Paused state is cleared.
·
XOFF code is output due to error and printer returns to normal conditions.
XOFF code output requirements:
·
Printer is in error.
·
Printer is in paused state.
·
Receive buffer has less than 128 bytes available.
Receive Buffer
XON code output
Start stop synchronous dual communication system
RS-232C
2400, 4800, 9600, 14400, 19200, 38400, 57600, 115200 bps
7 or 8
1
1 or 2
Even, odd, or none
D-SUB 25PIN 17LE-13250-27(D41)(DDK) or its equivalent
16KB
1K bytes
128 bytes
XOFF code output
- 58 -