Citizen CLP-8301 User Manual page 31

Citizen barcode label printer user's manual clp-8301

Hide thumbs Also See for CLP-8301:

Table of Contents

Chapter 4 Media (Paper) and Ribbon

The roll media is now loaded. Lastly close the top cover.

Fanfold media

Remove ribbon holder disks (two) from the ribbon holder assembly. Place the paper holder shaft onto

the round cuts on the paper guides and paper holder shaft supporting plates on both sides.

Place the fanfold media on firm, level surface in the back of the printer and route it through the

opening between top and lower bottom covers on the back of the printer, over the paper holder shaft

and platen out to the top of the printer. Other loading procedures are same as for roll media (see

P19-22).

Paper holder shaft

- - - -

Table of Contents