When "Fnnn" Command Is Executed While Tear Is Off; Priority Order; Priority - Citizen CLP-6401 User Manual

･ Initialization parameter values
Initialization values for print or cut position are described below by each
operating mode.
In Native ON
Print position
(Onnnn, form
offset)
Cut position (fnnn,
feed offset)
If value lower than the minimum value is set, the initialization value will be set
automatically.

6.5.6 When "fnnn" command is executed while Tear is OFF

Even with the tear-off OFF, the paper will be fed to the "fnnn"-specified position
after printing if an "fnnn > Onnnn" value is set by using the "fnnn" command.
This function can be used in such cases as another device is incorporated in the
printer.

6.5.7 Priority order

The following three functions (optional) cannot be performed simultaneously.
If commands for those three functions are received simultaneously, they will be
executed in the following priority:
1st: Auto-cutting
2nd: Peeling
3rd: Tear-off
Normal
Auto- cutter
print
55.9 (2.2)
55.9 (2.2)
55.9 (2.2) 86.4
(3.4)
6-18
Peeling Tear-off
55.9 (2.2) 55.9 (2.2)
68.6 73.7
(2.7) (2.9)
Unit: mm (inch)
Minimum
value
12.7 (0.5)
12.7
(0.5)